AT&T Release 2.0 manual Inserting the Conductors into the Connecting Blocks

Installing Telephones and Adjuncts

c.Punch down the telephone wires to the termination block.

i. Route the telephone wires underneath the termination block and through the fanning slots.

ii.Insert the conductors into the designated 110 connecting blocks already on the termination block. Follow the color sequence shown in Figure 3-24.

Figure 3-24. Inserting the Conductors into the Connecting Blocks

iii.Use the D-impact tool to seat the conductors. See Figure 3-25.

3-50Connecting the Telephones to the Control Unit