Installing the PC, CAT, or Printer

Hardware

248B adapters

355AF, 355A adapters

400B2 power adapters

D8W cords

D6AP power cords

D8AM modular crossover cable

M7U null modem cable

Z3A2, Z3A4 ADUs

2012D transformer

Z200A EMI filter

Procedure: Connecting a CAT Printer on a Different AC Outlet

1.Plug the short end of the Z200A EMI cord into the SMDR jack on the control unit (the upper jack).

2.Plug the other end of the Z200A EMI cord into a 355AF adapter.

3.Connect the female connector on the 355AF to one end of the M7U null modem cable.

4.Connect the other end of the M7U null modem cable to the 25-pin female connector on a Z3A4 ADU.

5.Plug one end of a D8W cord into the WALL jack on the Z3A4 ADU.

6.Plug the other end of the D8W cord into a modular jack on the D8AM modular crossover cable.

7.Plug the other end of the D8AM modular crossover cable into the top jack on the 400B2 power adapter.

8.Plug the 400B2 power adapter into the control unit-side wall jack. Make sure that building wiring has been set up so that the control unit- side wall jack communicates with the printer-side wall jack.

Connecting a Printer to the Control Unit 5-11

Page 230
Image 230
AT&T Release 2.0 manual Procedure Connecting a CAT Printer on a Different AC Outlet