AT&T Release 2.0 manual Hardware Requirements, Conversant Intro Documentation

Installing Applications

Hardware Requirements

The platform for CONVERSANT Intro is the Master Controller Ill (Tower), The Master Controller III is a desktop 20 MHz, 486-SX PC with six available EISA bus slots (with the tape drive installed). It has 8 MB of RAM.

■500 MB fixed disk drive

■250-MB tape drive

■3.5-inch floppy disk drive

■two serial ports and one parallel port are integrated on the main board with connectors on the back panel of the system unit. A diskette drive controller and fixed disk drive interface also are integrated on the main board.

■A Video Graphics Array (VGA) video display controller and a tape drive controller are provided on separate add-in boards.

■AT&T UNIX System V version 3.2.2. It includes a system unit, a monitor, and a keyboard.

Installation Procedure

See the section “CONVERSANTIntro Documentation” later in this chapter for installation instructions.

CONVERSANT Intro Documentation

■CONVERSANT Intro Application Support Software Installation Guide

■CONVERSANT Intro Application Support Software User’s Guide

CONVERSANT Intro 8-15