Connecting Data Equipment

NOTE:

For any data terminal that has both COM1 and COM2 connectors, make sure you use the one designated for data transmission. See the customer’s system administrator if you are not sure.

2.Make sure that the modem option settings for speed and parity are compatible with those of the data terminal. If you are not sure, see the customer’s system administrator or the documentation packaged with the modem and data terminal.

3.Connect the modem to the control unit:

a.Connect one end of a D4BU cord to the modem according to the modem’s documentation (usually the LINE jack).

b.Connect the other end to the appropriate basic station jack on the 012 or 008 OPT module. See Form 2a, System Numbering— Station Jacks for the appropriate module and station jack.

4.Connect all power cords to an AC outlet that is not controlled by a wall switch.

6-10Data Stations

Page 253
Image 253
AT&T Release 2.0 manual