Installing Applications

Hardware Requirements

an approved PC or other DOS compatible PC with the following:

at least 512K of RAM

a double-sided floppy diskette drive (either 5.25-inch or 3.5-inch)

a serial port assigned to COM1 or COM2. The serial port can use either a DB-9 or DB-25 connector. If a DB-9 connector is used, a 9-pin to 25-pin adapter is also required. The 9-pin side must be female.

video monitor (monochrome or color)

D8W cord and 355AF Adapter if PC is within 50 ft (15 m) of the control unit. Distances of greater than 50 ft (15 m) require back-to-back ADUs.

Installation Procedure

See the System Programming & Maintenance (SPM) guide for installation instructions.

8-30System Programming and Maintenance (SPM)

Page 340
Image 340
AT&T Release 2.0 manual Installation Procedure