Installation
1
2
3
4
5
When you load the WebView Livescope MV LE installer
Explorer,
Enter the Serial number and click Next. The Serial number is indicated on the seal attached outside the software package.
A screen appears where you can specify a folder in which MV LE is to be installed.
To specify a folder other than the one indicated, click Browse and select the folder you want.
When the folder has been specified, click Next.
Specify a name to be registered in the Program menu under the Start menu, then click Next.
Check the items you have specified and selected thus far, then click Next. The installation will be performed by copying files and setting the registry.
When installation is complete, click Finish to exit the installer.
ENGLISH
e | If you are upgrading MV from Ver. 2.0 LE, the information on registered |
Tip | cameras can be used with Ver. 2.1. |
|
|
7