(5)
Message | The camera server is not set up properly. Make sure: |
| [Target Application] of [Basic Settings] is set to [WebView Livescope]. |
|
|
Cause | The camera server application mode is set to |
|
|
Action to | Set the camera server application mode to WebView Livescope mode. |
be taken |
|
|
|
(6) Connection to camera server is restricted: Camera server registration error [06]
Message | Could not retrieve a description from the camera server. Make sure: |
| • Your computer is authorized to access the camera server. |
| • The network address is correct. |
|
|
Cause | Access restrictions have been set at the camera server. |
|
|
Action to | Make sure access to the camera server is authorized and that the network address |
be taken | has been correctly entered. |
|
|
(7) Other connector error: Camera server registration error [07]
Message | Could not retrieve a description from the camera server. |
|
|
Cause | A camera registration error other than errors (1) - (6). A malfunction may have |
| occurred on the network. |
|
|
Action to | Consult the network administrator. |
be taken |
|
|
|
(8) Administrator account authentication failed
Message | Administrator ID or password is invalid. |
|
|
Cause | Authentication failed due to invalid administrator ID or password. |
|
|
Action to | Enter the correct administrator ID or password. |
be taken |
|
|
|
(9) Could not get in camera control right queue
Message | Could not get in camera control right queue. |
|
|
Cause | Another client with control rights of a higher level than yourself is connected to |
| the camera server. |
|
|
Action to | Ask the other client to release the control privileges. |
be taken |
|
|
|
ENGLISH
21 
