Canon 2.1 user manual English, Operating from the Toolbar, Displaying Full Screens

Operating from the Toolbar

Displaying Full Screens

Images in a selected viewer can be displayed on the entire screen. Click on the viewer to select it,

then click the Full Screen button on the toolbar.

When you click anywhere on the full screen display, the camera’s pan and tilt are controlled so that

that position becomes the center of the image. Press ESC to return to the original screen display.

When you right click on the full-screen display, a pop-up

menu appears. Choose Return to Normal to restore the

normal display.

If you choose Camera Control Panel, the Camera Control

Panel appears in a pop-up window which you can use to

control the camera.

Viewing Connection Information

This command displays information about the connection

to the camera server. To view this information, click the

Network Information button on the toolbar.

●Frame rate

Shows the frame rate for the viewer.

●Image Size

Shows the size of the image being displayed.

●Video capture size

Shows the size of the video being captured by the camera server.

●Compression type

Shows the image compression type being used.

●Video [WV-TCP]

Shows the IP address and Port No. of the camera server if WV-TCP is being used for the video transmission protocol.

●Camera control [WV-TCP]

Shows the IP address and Port No. of the camera server if WV-TCP is being used for the camera control protocol.

●Video/Camera control [WV-HTTP]

Shows the IP address and Port No. of the camera server if WV-HTTP is being used for the protocol.

●HTTP proxy

Shows whether a HTTP proxy is being used (ON) or not used (OFF).

●Local time

Shows the current time at the camera server.

ENGLISH

15