Canon 2.1 user manual Power to the camera is turned off or there is a malfunction

(10) When switching to appropriate camera failed during assignment

Message	Could not switch camera.
Cause	An attempt was made to assign a camera that is different from the camera
	being viewed by a client with control rights of a higher level than yourself.
Action to	Ask the other client to release the control privilege.
be taken

(11) Power to the camera is turned off or there is a malfunction

Message	Camera is switched off or faulty.
Cause	Power to the camera is off, or a cable is not properly connected.
Action to	• Turn on power to the camera.
be taken	• Connect the cable.

(12) Incorrect address

Message	Could not connect to the camera server.
Cause	Network connection was cut, power to the camera server was cut, or the proxy
	settings are not correct.
Action to	• Re-connect to the network.
be taken	• Turn on power to the camera server.

•Redo the proxy settings.

(13)Connection restrictions at the camera server

Message	Your computer is not authorized to access the camera server.
Cause	Access restrictions have been set at the camera server.
Action to	Release the access restrictions.
be taken

(14) Maximum allowed number of camera server connections has been exceeded

Message	Number of accesses to the camera server has reached to the maximum.
Cause	The number of access to the camera server has been reached.
Action to	Try accessing the camera server later.
be taken

22