AT&T Release 2.0 Labeling 4-Pair Wire and Outlets, Color What It Identifies Special Features

Installing Telephones and Adjuncts

Table 3-2. - Continued

Color	What	It Identifies	Special Features
Yellow	Auxiliary	circuits	For auxiliary		circuits
	arranged in 3-pair		that are not arranged in
	modularity		3-pair modularity, use
			blank labels. If a
			system has customized
			labels for the auxiliary
			system,	use	them.
Orange	Connections from		Supplied	by	the
	transmission		equipment
	electronics equipment,		manufacturers
	such as multiplexer or
	concentrators

Labeling 4-Pair Wire and Outlets

It does not matter whether you pull the DIW cable from the telephone to the control unit or from the control unit to the telephone. In either case, mark one end of the DIW cable with the location or destination of the other end.

The following procedure is an example of pulling from the telephone to the control unit.

1.If you do not have labeling instructions on any the system forms, assign a number to each jack on the floor.

2.Put the boxes of wire near the offices (and jacks) where they have been assigned.

3.Mark the end of each DIW cable with the number of the jack where the wire has been assigned.

Connecting the Telephones to the Control Unit 3-69