Installing Applications

InnManager Guest Management

System

The InnManager Guest Management System is a stand-alone, DOS-based, integrated property management application combining all real time front- desk operations and record keeping. Suitable for hotels with up to 100 extensions, InnManager allows functions such as reservations, inventory, maintenance, check-ins and check-outs, call accounting, billing, and audits to be performed.

For additional information, see the “InnManager Documentation” section later in this chapter.

Considerations

InnManager operates on an approved AT&T PC operating with DOS version 3.3. The PC must be dedicated to the InnManager, although specific applications such a spread-sheet or word-processor may co- reside on the PC and be used to supplement InnManager.

Only one InnManager can be connected directly to the system. Additional InnManager terminals can be networked to the “host” InnManager PC.

Hardware Requirements

A typical InnManager system consists of the following equipment:

An approved AT&T DOS-based PC with the following configuration:

640K RAM

40MB hard drive

parallel printer output (AT&T Master Controller-II is recommended)

serial SMDR input

8-16InnManager Guest Management System

Page 326
Image 326
AT&T Release 2.0 manual InnManager Guest Management System