AT&T Release 2.0 manual

Installing Telephones and Adjuncts

4.If a conductor wire is accidentally pulled from a block, pull it with the long-nosed pliers to get some slack. Use your fingers to lay the conductor wire back in its slot in the index strip. Reseat it with the D-impact tool.

5.Seat the new connecting block by using the 788J1 impact tool.

See Figure 3-31.

6.Replace the telephone wire onto the connecting block.

■With interconnect wiring, remove the tag from the telephone wires and reseat the wires by using the D-impact tool.

■With SYSTIMAX, attach the patch cord to the connecting block.

3-74Connecting the Telephones to the Control Unit