![](/images/new-backgrounds/1206392/20639283x1.webp)
Connections
3.Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4.Press SOURCE on the product or remote control and select "AV".
Connecting to a Camcorder
1.Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Display .
2.Connect a set of audio cables between the AUDIO OUTPUT jacks on the cam- corder and the [AV /COMPONENT AUDIO IN
3.Press SOURCE on the product or remote control and select "AV".
4.Then, start the Camcorders with a tape inserted.
Note
The
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.