Pioneer XV-DV777, HTZ373DVD, XV-DV373 Listening to your system Chapter, Auto listening mode

Listening to your system

Chapter 3

Listening to your system

03

English

Auto listening mode

The Auto listening mode is the simplest way to listen to any source as it was mastered: the output from the speakers mirrors the channels in the source material.

•If you set up the system for Front surround (page 10), the Front Surround modes will give the best results.

MCACC TUNETESTTONE

F.S.SURR SURROUND ADVANCED SOUND

•MOVIE (Dolby Pro Logic II Movie) – Pro Logic II 5.1 channel surround sound, especially suited to movie sources (use with any two-channel source)

•MUSIC (Dolby Pro Logic II Music) – Pro Logic II 5.1 channel surround sound, especially suited to music sources (use with any two-channel source)

•STEREO – See Listening in stereo below

Dolby Pro Logic II Music settings

Deutsch Français

•Press SURROUND to select the AUTO listening mode.1

Listening in surround sound

You can listen to stereo or multichannel sources in surround sound.2 Surround sound is generated from stereo sources using one of the Dolby Pro Logic decoding modes.

•If you set up the system for Front surround (page 10), the Front Surround modes will give the best results.

MCACC TUNETESTTONE

F.S.SURR SURROUND ADVANCED SOUND

•Press SURROUND repeatedly to select a listening mode.1

The choices that appear in the display will vary according to the type of source that’s playing.

•AUTO – Auto listening mode (see above)

•DOLBY PL (Dolby Pro Logic) – 4.1 channel surround sound (use with any two-channel source)

When listening in Dolby Pro Logic II Music mode, there are three settings you can adjust: Center Width, Dimension, and Panorama.

1With Dolby Pro Logic II Music mode active, press SOUND.

2Use / to select ‘C WIDTH’, ‘DIMEN.’ or ‘PANORAMA’ then press ENTER to confirm.

•C WIDTH (Center Width) – Provides a better blend of the front speakers by spreading the center channel between the front right and left speakers, making it sound wider (higher settings) or narrower (lower settings).

•DIMEN. (Dimension) – Adjusts the depth of the surround sound balance from front to back, making the sound more distant (minus settings), or more forward (positive settings).

•PANORAMA – Extends the front stereo image to include the surround speakers for a ‘wraparound’ effect.

Italiano Nederlands Español

Note

1If the source is Dolby Digital or DTS, the corresponding indicator lights in the front panel display.

2 Note that when the tuner is selected, multichannel playback is not possible.

15

En