Pioneer S-DV777SW, HTZ373DVD, XV-DV373 About Hdmi, Using this unit with a Pioneer Flat Screen TV

Other connections 9

Switching the HDMI audio setting

To listen to audio from the HDMI interconnect, make sure you’ve specified the HDMI audio output setting.

1Switch the system into standby.

2Press SHIFT+SETUP and use / to choose HDMI OUT then press ENTER.

3Use / to choose the setting you want then press ENTER.

•AUDIO ON1 – Audio signals are output through the HDMI interconnect

•AUDIO OFF – Switches off HDMI audio

Resetting the HDMI connection

If you get an error message (the display shows HDMI ERR) or if the screen goes blank (for example, after changing the resolution), check the troubleshooting guide on page 46. If this doesn’t solve the problem, follow the steps below to reset the HDMI connection.

1Switch the system into standby.

2Press SHIFT+SETUP and use / to choose HDMI INI then press ENTER.

The system will restart and the HDMI settings are automatically reset to the factory defaults. See Video Output settings on page 29 for more on these settings.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI- compliant displays.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multichannel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Using this unit with a Pioneer Flat Screen TV

If you have a Pioneer flat screen TV2, you can use an SR+ cable3 to connect it to this unit and take advantage of various convenient features, such as controlling this unit via the flat screen TV’s remote sensor, automatic video input switching of the flat screen TV, and automatic volume muting on the flat screen TV.

English Deutsch Français Italiano Nederlands Español

Note

1 Audio output from the HDMI terminal is 2 channel linear PCM only.

2 This system is compatible with all Pioneer flat screen TVs from 2003 onward.

3The 3-ringed SR+ cable from Pioneer is commercially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable.

35

En