Vertical Communications DXP Plus Series, DXP Series, FX Series manual Using The Imist Module

Using The Other Telephone Features GCA70–258

9.13 Using The IMIST Module

Impact SCS 8324F-**, 8324S-**, and 8312S-** speakerphones equipped with the optional IMIST module can support an IST device (modem, FAX machine, industry-standard telephone, etc.) in addition to the LCD speakerphone. Depending on system programming, the IST device may be used to make outgoing calls and receive incoming calls.

The functionality of the IMIST module depends on the type of system you are using.

On a DXP system, the IMIST module does not have its own extension number and cannot function simultaneously with the speakerphone.

On a DXP Plus system, the IMIST module will function simultaneously with the speakerphone and have its own extension number if your system has revision 5 or later digital station board firmware. If your system has an earlier firmware revision, the telephone and IMIST module can not function simultaneously and the IMIST module will not have its own extension number.

On an FX Series system, the speakerphone and IMIST module can function simultaneously and the IMIST module has its own extension number.

NOTE: The IMIST module does not provide voltage to light a message waiting light. Message waiting lights on devices plugged into the IMIST module will not function.

If you have any other questions about IST devices, refer to GCA70–237, Industry-Standard Telephone Station User’s Guide .

NOTE: The IMIST module has a separate power supply. The wall transformer is a UL and CSA approved Class 2 device operating from 120 Vac, 60 Hz, 16 watts and provides an output of 24 Vac at 450 mA. For replacement, order Comdial P/N DIU-PTR.

Power IST Device

scs04

IMIST Module

9 – 10 LCD Speakerphone Station User's Guide