Features of the S100 Subwoofer, Control Panel

4. FEATURES OF THE S100 SUBWOOFER

The S100 subwoofer has a wide variety of features, including:

-Dedicated volume control

-Switch able phase control

-Variable low pass crossover (40 Hz to 240 Hz)

-Auto turn-on

-High and low level inputs

-Switch able power supply (110/220V user selectable)

The cabinet of the S100 uses 19 mm thick high-density composite walls.. The cabinet is finished in a high gloss acrylic piano black finish..

The amplifier is a 100W RMS/200W peak class A/B design.. It is not a switching/class D amplifier, and as such has a very low noise floor.. It features a large power transformer, oversized power supply capacitors, and a large external aluminum heat sink to ensure longterm cool operation..

The driver is a very long throw 20 cm diameter driver with a 38 mm diameter voice coil, heavy gauge cast aluminum basket, 2500-gram motor system with a 1000-gram magnet, epoxy-reinforced paper pulp cone, and progressive fabric spider.. It features a patent-pending XBL2 TM motor design with allows for a linear 24 mm of throw, and over

36 mm of peak-to-peak excursion.. The linear motor strength curve from this motor ensures extremely low distortion and compression over the full operating bandwidth, as well as a very high transient response..

4.1 Control Panel

The control panel of the S100 is labeled for easy identification and use.. The most commonly adjusted controls are located the top of the amplifier, while the least accessed connections are located at the bottom..

The volume control allows setting the gain of the built-in amplifier to match your main speakers.. A total range of 60 dB is provided, allowing integration with nearly any audio system..

Phase can be switched between 0 and 180 degrees.. Phase adjustment is critical to get proper subwoofer/speaker integration..

The crossover frequency has a roll-off range from 40 Hz to 250 Hz.. For use with Final Sound electrostatic panels the crossover is typically set to the lowest frequency the panel can reproduce..

4.2 Connections

The auto-on switch will place the amplifier in low-power mode until an input signal is detected on the low or high- level inputs.. When an input signal is detected the amplifier will automatically turn on, and will stay on for approxi- mately 10 minutes after the input signal is removed..

The line level inputs are standard RCA connectors, and are compatible with all consumer electronics.. The amplifier will automatically sum the two input signals together to create a mono bass signal.. In the event an LFE/SUB-OUT signal is fed to the subwoofer, either line level input may be used..

The high level inputs are 3 way binding posts, and are compatible with all consumer amplifiers.. The input impedan- ce of the high level inputs is high enough to not draw significant amounts of power or load down the output of any power amplifier.. Small gauge wire may be used to provide the input signal..

The power connection is a standard IEC connector with a built-in fuse holder.. The power supply cord must be plugged into the connector before the power supply cord is plugged into the wall socket..

The fuse is contained inside the IEC connector.. The small tab inside the connector must be depressed allowing the fuse holder to be slid out.. The power supply cord cannot be used when the fuse holder is extended or removed..

S100 specifications

The Final Sound S100 is a revolutionary product in the world of audio technology, particularly known for its innovative approach to sound reproduction. This electrostatic loudspeaker combines cutting-edge technology with aesthetic design, making it a popular choice among audiophiles and music enthusiasts. The S100 is engineered to provide an unparalleled listening experience by capturing the smallest nuances of sound.

One of the main features of the Final Sound S100 is its electrostatic design. Unlike traditional dynamic speakers that rely on moving coils and cones, electrostatic speakers use a thin diaphragm suspended between two stator plates. This design allows for incredibly precise sound reproduction, enabling the S100 to deliver clear highs and rich mid-range tones without distortion, even at high volume levels. The use of electrostatic technology means that the S100 can produce a quick transient response, enhancing the clarity and detail of the music being played.

In terms of build quality, the Final Sound S100 exudes elegance and sophistication. The speaker is housed in a sleek, minimalist cabinet that not only looks stylish but also minimizes resonance, allowing for clearer sound output. The cabinet's materials are carefully selected to enhance the overall acoustic performance, ensuring that the speakers blend seamlessly into any living space while also providing an impressive audio experience.

Another noteworthy characteristic of the S100 is its wide soundstage. The electrostatic design allows for a larger dispersion of sound, which gives listeners a more immersive experience. The speakers excel in creating a three-dimensional audio environment, making it feel as though the music is surrounding the listener rather than just emanating from a particular point. This feature is particularly appreciated when listening to complex musical pieces or live recordings, where spatial cues play a significant role.

The Final Sound S100 also includes advanced technologies such as high-quality crossovers and precision engineering components, which enhance its performance. These elements work together to ensure that the sound is balanced across different frequencies, allowing for a natural listening experience that doesn't favor any specific tone.

In conclusion, the Final Sound S100 represents a significant advancement in audio technology. With its electrostatic design, elegant aesthetics, wide soundstage, and advanced engineering, it stands out as a top choice for those seeking high-fidelity sound reproduction. Whether for casual listening or critical audio evaluation, the S100 offers a remarkable auditory experience that captivates and delights.