Pelco IV SE manual Advanced Camera Settings, Shutter Speed, Agc Limit

Models: IV SE

1 96
Download 96 pages 46.76 Kb
Page 42
Image 42
ADVANCED CAMERA SETTINGS

ADVANCED CAMERA SETTINGS

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

<ADVANCED SETTINGS>

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS SHARPNESS LEVEL

AUTO WHITE BALANCE

RGAIN B GAIN

BACKLIGHT COMP VIDEO LEVEL

WIDE DYNAMIC RANGE PROGRESSIVE SCAN E. IMAGE STABILIZER

BACK

EXIT

SHUTTER SPEED

Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value).

AUTO (default)

The electronic shutter speed is set automatically by the amount of light

 

sensed by the camera.

NUMERIC VALUE

Spectra IV/Spectra IV SE dome systems have several numerical shutter

 

speed settings. The higher the number, the faster the electronic shutter.

 

The slowest shutter speed setting is 2 = 1/2 second

 

The fastest setting is 30,000 = 1/30,000 second

 

Increasing the shutter speed lowers the light sensitivity and reduces the

 

streaking of fast moving objects.

NOTE: Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment. This will eliminate any flicker that may occur in the picture.

AGC LIMIT

AGC limit allows users to adjust how the system balances AGC (automatic gain control) and electronic shutter in low light conditions. As scene lighting decreases, the system will automatically adjust, adding a mixture of AGC and slow shutter according to the AGC limit setting. AGC limit can be set between 0 and 40, with 40 applying maximum AGC before slow shutter. In contrast, setting AGC limit to 0 will force the system software to apply maximum slow shutter (as defined by the low light limit setting) before any AGC is applied. The default AGC settings vary depending on camera model.

NOTE: The maximum slow shutter that the system will achieve is 1/2 second shutter (refer to the Low Light Limit section).

*This setting applies only to Pressurized Spectra IV dome systems.

42

C3412M (9/06)

Page 42
Image 42
Pelco IV SE manual Advanced Camera Settings, Shutter Speed, Agc Limit