Pelco IV SE manual Video Level, Wide Dynamic Range ON, Applies only to 23X and 35X models

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

<ADVANCED SETTINGS>

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS SHARPNESS LEVEL

AUTO WHITE BALANCE

RGAIN B GAIN

BACKLIGHT COMP VIDEO LEVEL

WIDE DYNAMIC RANGE PROGRESSIVE SCAN E. IMAGE STABILIZER

BACK

EXIT

VIDEO LEVEL

Set the video output to one of the following:

NORMAL	1.0 volt peak-to-peak
HIGH (default setting)	1.2 volt peak-to-peak to compensate for losses in video cable.

WIDE DYNAMIC RANGE

(Applies only to 23X and 35X models.)

Wide dynamic range (WDR) balances the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and provides more detail. For 23X models, the range from the darkest to the brightest sections of the scene is 80X more when WDR is ON than when OFF. For 35X models, the range from the darkest to the brightest sections of the scene is 128X more when WDR is ON than when OFF.

Available settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.

NOTE: Wide dynamic range is disabled when electronic image stabilization is set to 5 Hz or 10 Hz.

Wide Dynamic Range ON Wide Dynamic Range OFF

*This setting applies only to Pressurized Spectra IV dome systems.

46 C3412M (9/06)