Pelco IV SE manual Title Text

TITLE TEXT

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

TITLE TEXT

ENABLE TITLE TEXT <EDIT TITLE TEXT>

BACK

EXIT

Title text is the label used to identify the camera viewed on the monitor. Up to 20 characters can be used for a title.

To edit the title text label, do the following:

1.Use the joystick to position the cursor beside EDIT TITLE TEXT.

2.Press Iris Open. The following appears on the monitor:

EDIT TITLE TEXT

1234567890OK

ABCDEFGHIJCANCEL KLMNOPQRST

UVWXY.,-/SPACE

abcdefghijBACKSPACE klmnopqrst

uvwxyz#&:*

3.Use the joystick to position the cursor beside a character. Press Iris Open to select the character. To clear a character, position the cursor beside BACKSPACE and then press Iris Open.

4.When the title is completed, move the cursor to OK. Press Iris Open to return to the Title Text menu.

5.Enable the title text label by doing the following:

a.Move the cursor beside ENABLE TITLE TEXT.

b.Press Iris Open. The cursor moves to the right.

c.Move the joystick up or down to view the selections. Select ON and then press Iris Open to enable the title text.

*This setting applies only to Pressurized Spectra IV dome systems.

70 C3412M (9/06)