![AZIMUTH ZERO](/images/new-backgrounds/36969/36969103x1.webp)
SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
MOTION
AUTO FLIP PROPORTIONAL PAN PARK TIME (MINUTES)
PARK ACTION SCAN SPEED (DEG/S) PRESET FREEZE FRAME
LIMIT STOPS
<SET MANUAL STOPS> <CLEAR MANUAL STOPS> <SET SCAN STOPS> <CLEAR SCAN STOPS>
<SET AZIMUTH ZERO> <CLEAR AZIMUTH ZERO>
BACK
EXIT
REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET
AZIMUTH ZERO
Azimuth is the pan angle from 0° to 359°. Azimuth zero is the pan position you specify to be the 0° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compass readings are based on the set Azimuth Zero point.
To program azimuth zero:
1.Use the joystick to position the cursor beside SET AZIMUTH ZERO.
2.Press Iris Open.
3.Follow the directions displayed on the monitor.
To clear azimuth zero:
1.Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO.
2.Press Iris Open.
3.Follow the directions displayed on the monitor.
*This setting applies only to Pressurized Spectra IV dome systems.
52 | C3412M (9/06) |