SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS> ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
EVENT
EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL> <EDIT EVENT> <CLEAR EVENT> <LIST EVENT>
HOLIDAY
<EDIT HOLIDAY> <CLEAR HOLIDAY> <LIST HOLIDAYS>
BACK
EXIT
REFERENCE INFORMATION
CLEAR EVENT
To clear an event:
1.Use the joystick to position the cursor beside CLEAR EVENT.
2.Press Iris Open.
3.Follow the directions displayed on the monitor.
LIST EVENT
To list events:
1.Use the joystick to position the cursor beside LIST EVENT.
2.Press Iris Open.
3.All programmed events will be listed.
HOLIDAY
Use the following steps to create a new holiday.
1.Use the joystick to position the cursor beside HOLIDAY. Press Iris Open.
2.Move the joystick up or down to scroll through the options. If no holidays have been created in the past, NEW is the only selectable option. Press Iris Open to select NEW.
3.Proceed to the Edit Holiday section.
Use the following steps to manage an existing holiday.
1.Use the joystick to position the cursor beside HOLIDAY. Press Iris Open.
2.Move the joystick up or down to scroll through the holidays. Press Iris Open to enter selection.
3.Proceed to the Edit Holiday section.
NOTE: Holidays cannot be changed through the Edit Schedule option from the Preset, Pattern, Window Blanking, Alarm, or Aux menus.
*This setting applies only to Pressurized Spectra IV dome systems.
C3412M (9/06) | 81 |
