SPECTRA IV
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
CAMERA
TYPE OF LIGHTING
AUTO FOCUS
ZOOM LIMIT
ZOOM SPEED
LOW LIGHT LIMIT
IR CUT FILTER
AUTO IR LEVEL
<ADVANCED SETTINGS>
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED
AGC LIMIT
AUTO IRIS
AUTO IRIS LEVEL
AUTO IRIS PEAK
AUTO SHARPNESS SHARPNESS LEVEL
AUTO WHITE BALANCE
RGAIN B GAIN
BACKLIGHT COMP VIDEO LEVEL
WIDE DYNAMIC RANGE PROGRESSIVE SCAN E. IMAGE STABILIZER
BACK
EXIT
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture.
There are two settings:
ON (default) | The camera automatically maintains a normal sharpness mode. |
OFF | The sharpness of the picture is set manually by programming the sharpness |
| level. Sharpness level settings range from |
AUTO WHITE BALANCE
(Does not apply to 22X black-white models.)
This feature automatically processes the viewed image to retain color balance over a color temperature range. The default setting for auto white balance is ON.
R GAIN | Adjusts the picture output in the red range. As you change the value, you will |
| see the color change on your monitor. |
B GAIN | Adjusts the picture output in the blue range. As you change the value, you will |
| see the color change on your monitor. |
*This setting applies only to Pressurized Spectra IV dome systems.
44 | C3412M (9/06) |
