Pelco IV SE manual CM9500, CM9740/CM9760/CM9770/CM9780, KBD4000/KBD4002, MPT9500

CM9500

1.Enter the number of the Spectra IV/Spectra IV SE dome system and press the CAM key. The main menu appears.

2.Highlight SETUP in the main menu and press the SELECT key.

3.Highlight CAM in the Setup menu and press the SELECT key.

4.Highlight PRESET in the Camera menu and press the SELECT key.

5.Enter 95 and press the F1 key. The main menu appears.

CM9740/CM9760/CM9770/CM9780

1.Press the ESCAPE key to open the main menu. Select DEF. The Define submenu appears.

2.Enter your four-digit PIN if this is your first time entering this mode.

3.Enter 95 and select PRST. The main menu appears on the monitor.

4.Select the Quit icon to return to the default menu.

KBD4000/KBD4002

1.Press the SPOT MONITOR key.

2.Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen.

MPT9500

Standard Coaxitron Mode

1.Enter 95 and press the PRESET SET key.

2.Position the asterisk in the YES row and press the F1 key. The main menu appears.

Extended Coaxitron or RS-485 Mode

1.Enter 95 and press the PRESET SET key.

2.Press the F2 key. The main menu appears.

22 C3412M (9/06)