Pelco IV SE manual Dome Settings, Camera, Type Of Lighting, Auto Focus

Dome Settings

CAMERA

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA> <MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

<ADVANCED SETTINGS>

BACK

EXIT

TYPE OF LIGHTING

(Does not apply to 16X or 23X models.)

Pelco has calibrated settings that optimize the white balance and the picture for indoor and outdoor lighting conditions. There are two settings:

OUTDOOR (default)

INDOOR

AUTO FOCUS

Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.

There are two auto focus settings:

ON (default)	If auto focus mode is set to ON, the camera will focus automatically when using
	pan, tilt, and zoom functions.
OFF	Focus is operated manually. To focus, press the Focus Far or Focus Near button
	on the controller.

*This setting applies only to Pressurized Spectra IV dome systems.

38 C3412M (9/06)