Nikon COOLPIXL810RED, COOLPIXL810BLUE, COOLPIXL810BLK Flash Mode Setting, Red-eye Reduction

Shooting Features

C The Flash Mode Setting

•The setting varies with the shooting mode.

➝“Available Features” (A 50)

➝“Default Settings” (A 60)

•Some settings cannot be used with other functions (A 64).

•The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the camera is turned off.

C Red-eye Reduction

This camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).

Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect. Additionally, if the camera detects red eye while saving an image, the affected area will be processed to reduce red-eye before the image is saved.

Note the following when shooting:

•Because pre-flashes are fired, there is a slight lag between when the shutter-release button is pressed and when the shutter is released.

•More time than usual is required to save images.

•Red-eye reduction may not produce the desired results in all situations.

•In rare cases, areas of the image that are not affected by red-eye may be processed by red-eye reduction. In these cases, select another flash mode and take the picture again.

54