Nikon L810 user manual Shooting Issues, F10, Characteristics of Digital Cameras, Pressed, Saved

Characteristics of Digital Cameras

In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, then turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon-authorized service representative. Note that disconnecting the power source as described above may result in the loss of any data not saved to internal memory or the memory card at the time the problem occurred. Data already saved will not be affected.

Shooting Issues

	Problem	Cause/Solution	A
	Cannot switch to shooting		71, 76,
		Disconnect the HDMI cable or USB cable.	E17,
	mode.
			E20
		• When camera is in playback mode, press the A	29
	No image captured when	button, the shutter-release button, or the b (e
		movie-record) button.
	the shutter-release button is
		• When menus are displayed, press the d button.	3
	pressed.
		• Battery is exhausted.	21
Technical		• When flash lamp flashes, flash is charging.	52
		In some shooting conditions, such as when the
	Cannot capture 3D image.	subject is dark or low in contrast, the second image	E7
		may not be captured or the 3D image may not be
Notes and Index		saved.

F10