Nikon COOLPIXL810BLK Hide info is selected for Photo info, Select Show info, Support Print date

Problem	Cause/Solution	A
	• If camera clock has not been set, “Date not set”
	indicator flashes during shooting and movie
	recording. Images and movies saved before clock is
Date and time of recording	set are dated “00/00/0000 00:00” or “01/01/2012	16, 88,
	00:00” respectively. Set the correct time and date
are not correct.		E47
	from the Time zone and date option in the setup
	menu.
	• Check camera clock regularly against more
	accurate timepieces and reset as required.
No indicators displayed in	Hide info is selected for Photo info.	88, E51
monitor.	Select Show info.
Print date not available.	Time zone and date has not been set.	16, 88,
		E47
Date not imprinted on	• The current shooting mode is one that does not
images even when Print	support Print date.	88, E53
date is enabled.	• The date cannot be imprinted on movies.
Screen for setting time zone
and date is displayed when	Clock battery is exhausted; all settings were restored	16, 19
camera is turned on.	to their default values.
Camera settings reset.			Technical
	The camera may become hot when shooting movies
Camera becomes hot.	or uploading images from an Eye-Fi card for an	–
	extended period of time, or when the camera is used
			NotesandIndex
	in a hot area; this is not a malfunction.

F9