Advanced
operations
41
VQT3Z79
AVolume (Channel balance)
BDelay time for the Centre speaker
CDelay time for the Surround and Surround
back speakers*
* Surround back speakers: optional (>10)

∫Adjusting speaker level

(Effective when playing multi-channel audio)
1Select “Test” and press [OK].
A test signal is output.
2While listening to the test signal
Press [3,4] to adjust the volume of each
speaker ( ).
The volume can be adjusted between r6 dB
to s6 dB.
≥Set each speaker level according to the
volume of the Front (L) and Front (R)
speaker volume respectively.
3Press [OK].
The test signal stops.

∫Delay time

For optimum listening with 5.1-channel sound, all
the speakers, except for the subwoofer, should be
the same distance from the seating position.
If either distance 1 or 2 is less than 3, measure
the distance and adjust the time to make up for
the difference (see the table below).
1 2 3: Primary listening distance
AActual speaker position
BIdeal speaker position
1Press [3,4,2,1] to select the distance
box ( ) and press [OK].
2Press [3,4] to select the setting and
press [OK].
Delay time for the Centre speaker
Subtract the distance 1 from 3
Delay time for the Surround and Surround
back speakers
Subtract the distance 2 from 3
To finish the speaker setting
Press [3,4,2,1] to select “Complete” and
press [OK].
Speaker settings
0
00
0.0
0.0
ms
Complete
Test
LS
RL
RS
dB
dBdB
ms C
0
dB
SW
dB
0
Distance (Approx.) Setting
34 cm 1.0ms
68 cm 2.0ms
102 cm 3.0ms
136 cm 4.0ms
170 cm 5.0ms
Distance (Approx.) Setting
170 cm 5.0ms
340 cm 10.0ms
510 cm 15.0ms
:
:
L
LS
R
SW
C
RS
C
RS
LS
1
2
3

A

B

0.0
ms
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 41 ページ ２０１２年１月１９日　木曜日　午前１０時３４分