Reference
47
VQT3Z79
Cannot switch audio.
¾When audio is output from the HDMI AV OUT
terminal, set “Dolby D/Dolby D +/Dolby
TrueHD”, “DTS/DTS-HD” or “MPEG Audio” to
“PCM”. (>36)
No sound from the TV.
¾Press [EXT-IN] to select the corresponding
source. (>20)
¾When connecting the unit to a TV using an
HDMI cable, check whether the HDMI
terminal on the TV is labelled “HDMI (ARC)”.
If not labelled in this way, connect using the
HDMI cable in combination with an optical
digital audio cable. (>13)
¾If there is no sound from the equipment
connected to this unit’s DIGITAL AUDIO IN
terminal, please make sure that the optical
audio output of the equipment is set to PCM.
Disc cannot be played.
¾The disc is dirty. (>5)
Still pictures (JPEG) do not play back
normally.
¾The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾The SD card is write-protected. (>7)
¾Confirm that this unit is connected to the
broadband Internet. (>16)
¾Confirm the “BD-Live Internet Access”
settings. (>39)
¾Confirm an SD card is inserted into the SD
card slot. (>20)
Alternative soundtrack and subtitles cannot
be selected.
¾The languages are not recorded on the disc.
¾You may not be able to use the Option menu
to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make
changes. (>24)
Cannot charge or operate.
¾Check that the iPod/iPhone is connected
firmly. (>26)
¾The battery of the iPod/iPhone is depleted.
Charge the iPod/iPhone, and then operate
again.
¾When unexpected operation occurs while
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Cannot display iPod/iPhone videos/photos on
the TV.
¾Make sure that TV is connected to the VIDEO
OUT terminal on this unit. (>14)
¾Operate the iPod/iPhone menu to make the
appropriate video/photo output settings for
your TV. (Refer to operating instructions for
your iPod/iPhone.)
The TV input channel unintentionally changes
to HDMI input.
¾When the main unit is connected with an
“HDAVI Control” compatible TV and VIDEO
IN is selected for iPod/iPhone video or photo
playback, the TV input channel will
automatically change to the HDMI input
channel when [HOME] is pressed.
jRe-select the TV’s VIDEO IN input channel.
Distorted sound or noise is heard.
¾Adjust the position of the antenna.
A beat sound is heard.
¾Try to keep a certain amount of distance
between the antenna and the TV.
Noise is excessive.
¾Change the audio to be output as monaural.
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
≥To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUTO STEREO”.
PlaybackiPod/iPhone operationRadio
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 47 ページ ２０１２年１月１９日　木曜日　午前１０時３４分