Reference
Advanced
operations
45
VQT3Z79
This unit is turned off when the input for the
TV is switched.
¾This is a normal phenomenon when using
VIERA Link (HDAVI Control 4 or later). For
details please read the operating instructions
for the TV.
The remote control doesn’t work properly.
¾Change the batteries in the remote control.
(>8)
¾The remote control and main unit are using
different codes. If “SET ” is displayed on the
unit’s display when a button is pressed on the
remote control, change the code on the
remote control. (>40,49)
The TV tuner mode is not displayed when the
TV is switched on.
¾
This phenomenon may occur, depending on the
TV setting, when “Quick Start” is set to “On”.
¾Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾The ratings level returns to the factory preset.
1
While the unit is on, press and hold [OK], the
yellow button and the blue button on the remote
control at the same time for more than 5 seconds.
j“00 RET” is displayed on the unit’s display.
2Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until “03 VL” is
displayed on the unit’s display.
3Press [OK] on the remote control or
[<OPEN/CLOSE] on the unit.
This unit does not recognize the USB
connection correctly.
¾Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
¾USB devices may not be recognized by this
unit when connected using the following:
ja USB hub
ja USB extension cable other than the
supplied with the Wireless LAN Adaptor
DY-WL5 (optional)
¾If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
The unit switches to standby mode.
¾This unit will automatically turn to standby
mode after 30 minutes if it is inactive. (>21)
¾
When the time set for the sleep timer has
passed, the main unit will be turned off. (
>
8)
¾
One of the unit’s safety devices is activated.
Press [
Í
/I] on the main unit to turn the unit on.
The unit does not turn off.
1Press and hold [Í/I] on the main unit for 5
seconds. (If still unable to turn the unit off,
disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.)
2Reset the unit as follows:
While the unit is off, press and hold
[+VOL UME], [<OPEN/CLOSE] and [Í/I] on
the main unit at the same time for more than 5
seconds.
The images from this unit do not appear on
the TV.
Picture is distorted.
Jittering occurs.
¾An incorrect resolution is selected in “HDMI
Video Format”. Reset the setting as follows:
1While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more th an
5seconds.
j“00 RET” is displayed on the unit’s display.
2Repeatedly press [1](right) on the remote
control or [Í/I] on the unit until “04 PRG” is
displayed on the unit’s display.
3Press and hold [OK] on the remote control or
[<OPEN/CLOSE] on the unit for at least
3seconds.
Set the item again. (>36)
jWhen Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output in
bitstream, select “Yes” in “Default Settings”
and make proper settings. (>40)
¾The unit and television are using different
video systems.
1While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more th an
5seconds.
–“00 RET” is displayed on the unit’s display.
2Repeatedly press [1](right) on the remote
control or [Í/I] on the unit until “05 P/N” is
displayed on the unit’s display.
(Continued on the next page)
Picture
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 45 ページ ２���１２年１月１９日　木曜日　午前１０時３４分