Reference
49
VQT3Z79
F99
¾The unit fails to operate properly. Press [Í/I]
on the main unit for 3seconds to switch the
unit to standby, then switch back on.
HDMI ONLY
¾Some BD-Video discs can only be output with
HDMI.
NET
¾While connecting to a network.
No PLAY
¾There is a viewing restriction on a BD-Video
or DVD-Video. (>39)
No READ
¾The media is dirty or badly scratched. The
unit cannot play.
PLEASE WAIT
¾The unit is carrying out internal process. This
is not a malfunction. You cannot operate the
unit while “PLEASE WAIT” is displayed.
REMOVE
¾The USB device is drawing too much power.
Remove the USB device.
SET
(“” stands for a number.)
¾The remote control and main unit are using
different codes. Change the code on the
remote control.
Press and hold [OK]
and the indicated
number button at the
same time for more
than 5seconds.
U59
¾The unit is hot.
The unit switches to standby for safety
reasons. Wait for about 30 minutes until the
message disappears.
Select a position with good ventilation when
installing the unit.
H or F
(“” stands for a number.)
¾Check and correct the speaker cable
connections.
¾There is something unusual.
¾Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
IPOD OVER CURRENT ERROR
¾The iPod/iPhone is drawing too much power.
Remove the iPod/iPhone, and turn the unit off
and on again.
START
¾
The system is being restarted during the
firmware update. Please do not turn off the unit.
UPD/
(“” stands for a number.)
¾The firmware is being updated. Please do not
turn off the unit.
FINISH
¾The firmware update is complete.
NOT CONDITIONAL
¾The requested operation cannot be
conducted.
SET OK
¾The stations are set, and the radio tunes to
the last preset station.
ERROR
¾Automatic presetting is unsuccessful. Preset
the stations manually.
TUNED/STEREO
¾Stereo broadcasting or stereo sound is
selected.
TUNED
¾Monaural broadcasting or monaural sound is
selected.
On the unit’s display
1Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2Press [Í/I] to turn the unit on.
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 49 ページ ２０１２年１月１９日　木曜日　午前１０時３４分