Panasonic SC-BTT790, SC-BTT583 Connecting the AC mains lead, Preparing the wireless system

STEP 4: Connecting the AC mains lead

Connect only after all other connections are complete.

AC IN [Except[Australia[and[New[Zealand]

Getting started

AC mains lead	*
(supplied)

*The cord with a ferrite core is for the wireless system.

To a household mains socket

110 127V 220 240V

VOLT ADJ

Before connecting the AC mains lead;

Set the voltage at the bottom of the main unit.

≥Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used.

[For]the]Middle]East]

Use the AC mains lead that matches the socket for the area you live in.

(For Saudi Arabia and Kuwait)

BE SURE TO READ THE

CAUTION FOR THE AC MAINS

LEAD ON PAGE 2 BEFORE

CONNECTION.

[For]South]East]Asia]

AC mains lead with a label is for Thailand.

AC mains lead without a label is for areas other than Thailand.

≥The wireless system ([BTT790]) and the main unit consume a small amount of AC power (> 50, 51) even when turned off. In the interest of power conservation, if you will not be using them for an extended period of time, they can be disconnected.

STEP 5: Preparing the wireless system

[BTT790]

Turn on the wireless system after all connections are complete.

Press [C I, B Í] on the wireless system.

CI: The wireless system is on.

		B Í: The wireless system is off.
	WIRELESS LINK	The wireless system consumes a small amount of power, even when it is off.
		WIRELESS LINK indicator
		Red: The wireless system is on and the wireless link is deactivated.
Wireless		Green: The wireless system is on and the wireless link is activated.
system

VQT3Z79 17