TV & RadioReference
Advanced
operations
29
VQT3Z79
Listening to the RadioYou can preset up to 30 channels.
Preparation
Make sure that the FM antenna is connected. (
>
14)
1Press [RADIO] to select “FM”.
2Press and hold [STATUS] to select
“LOWEST” or “CURRENT”.
LOWEST
To begin auto preset with the lowest
frequency (FM87.50).
CURRENT
To begin auto preset with the current
frequency.*
* To change the frequency, refer to “Manual
tuning and presetting”.
3Press and hold [OK].
Release the button when “AUTO” is
displayed.
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
1Press [RADIO] to select “FM”.
2Press the number buttons to select the
channel.
To select a 1-digit number
e.g., 1: [1]B[OK ].
To select a 2-digit number
e.g., 12: [1]B[2].
Alternatively, press [W,X] or [3,4].
∫Manual tuning and presetting
Select a radio broadcast.
1Press [RADIO] to select “FM”.
2Press [SEARCH6] or [SEARCH5] to
select the frequency.
≥To start automatic tuning, press and hold [SEARCH6],
[SEARCH5] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
3While listening to the radio broadcast
Press [OK].
4While “P” is flashing on the display
Press the number buttons to select the
channel.
≥A station previously stored is overwritten when another
station is stored in the same channel preset.
≥The radio settings will be shown on the unit's display.
(Some settings are also indicated on the TV screen.)
Presetting stations
automatically
Listening to a preset channel
SC-BTT790&583&490GNGSGA-VQT3Z79_mst.book 29 ページ 2012年1月19日 木曜日 午前10時34分