Listening to the radio (continued)
1 Press TUNER/BAND repeatedly until the band you want appears in the display.
Every time you press the button, the band changes as follows:
North and South American, Australian and Thai models:
FM ˜ AM Other models: FM n MW n SW
n
2 Press TUNING MODE repeatedly so that “PRESET” appears in the display.
MANUAL n AUTO n PRESET
n
3 Turn the jog dial (or press = or
+on the remote) to tune in the desired preset station.
Turn counter- |
|
| Turn clockwise |
clockwise |
|
| (or press + |
(or press = | – | + | on the remote) |
|
| ||
on the remote) |
|
| for higher |
for lower preset |
|
| preset numbers. |
numbers. |
|
|
|
Preset number Frequency | |||
|
|
| TUNED |
|
|
| STEREO |
|
|
| VOLUME |
PRESET |
|
| MHz |
To |
| Do this |
|
Turn off the radio | Press POWER. | ||
Adjust the volume | Turn VOLUME (or press | ||
|
| VOLUME +/– on the | |
|
| remote). |
|
To listen to non-preset radio stations
Press TUNING MODE repeatedly so that “MANUAL” appears in step 2, then tune in the station by turning the jog dial.
Tips
•Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play).
•You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection).
•When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
•To improve broadcast reception, reorient the supplied antennas.
18