Step 2: Setting up your speakers (continued)
Adjusting the speaker volume
To enjoy Dolby Pro Logic Surround sound, turn the Dolby Pro Logic mode on, then adjust the volume of each speaker using the test tone that the system provides.
1 Press PRO LOGIC.
“PRO LOGIC ON” appears.
2 Press T.TONE ON/OFF on the remote.
The test tone is heard from the speakers in the following order. Adjust the volume of the test tone.
Front (left) n Center n Front (right)
n | Rear |
|
POWER
1
3 From your listening position, press CENTER LEVEL (+/-) and REAR
0 | ) | „ |
⁄Æ‚
| … | … |
|
» Æ | „ | „ | » Æ |
Æ |
|
|
|
» | Æ |
|
|
⁄ |
|
| ⁄ |
» | Æ |
|
|
= | + | p |
|
0 | ) | P |
|
| 4 |
|
|
4 |
| $ |
|
$
PRO LOGIC ON/OFF
3
2,4
LEVEL (+/-) on the remote to adjust the volume.
The volume levels from each speaker must become the same.
4 Press T.TONE ON/OFF when you are done adjusting.
The test tone is turned off.
Note
The test tone feature works only for Dolby Pro Logic Surround sound.
Tip
If you turn VOLUME (or press VOLUME +/– on the remote) all the speaker volumes change.
8
