Manuals / Sony / Home Audio / Stereo System

Sony MHC-D90AV Specifications, For the U.S. model AUDIO POWER SPECIFICATIONS, Amplifier section

Models: MHC-D90AV MHC-GR10AV

1 50

Download 50 pages 11.72 Kb

Page 47

Specifications

For the U.S. model

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL

HARMONIC DISTORTION:

With 8 ohm loads, both channels driven, from 70 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.9

%total harmonic distortion from 250 milliwatts to rated output (FRONT SPEAKER).

Amplifier section

Continuous RMS power output (U.S. and Canadian models)

FRONT SPEAKER:

120 + 120 watts (8 ohms, at 1 kHz, 5% THD)

REAR SURROUND SPEAKER:

12.5 + 12.5 watts (16 ohms, at 1 kHz, 5% THD)

CENTER SURROUND SPEAKER:

25 watts (8 ohms, at 1 kHz, 5% THD)

(Other models)

FRONT SPEAKER:

100 + 100 watts (8 ohms, at 1 kHz, 10% THD)

REAR SURROUND SPEAKER:

12.5 + 12.5 watts (16 ohms, at 1 kHz, 10% THD)

CENTER SURROUND SPEAKER:

25 watts (8 ohms, at 1 kHz, 10% THD)

Outputs	VIDEO/MD OUT (phono
	jacks): voltage 250 mV
	impedance 1 kilohms
	PHONES (stereo phone
	jack): accepts headphones
	of 8 ohms or more.
	FRONT SPEAKER:
	accepts impedance of 8 to
	16 ohms.
	REAR SURROUND
	SPEAKER:
	accepts impedance of 8
	ohms.
	CENTER SURROUND
	SPEAKER:
	accepts impedance of 8
	ohms.
	SUPER WOOFER (except
	for MHC-D90AV):
	voltage 1 V impedance
	1 kilohms

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780nm)
	Emission duration:
	continuous
Laser output	Max. 44.6 μW*
	*This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Frequency response	2 Hz – 20 kHz (±0.5 dB)
Wavelength	780 – 790 nm
Signal-to-noise ratio	More than 90 dB
Dynamic range	More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength	600 nm
Output Level	–18 dBm

Tape player section

Recording system

4-track 2-channel stereo

Peak music power output (except for U.S. and Canadian models)

1500 watts

Frequency response	60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)	using Sony TYPE I
	cassette

Inputs

VIDEO/MD IN (phono jacks): voltage 250 mV, impedance 47 kilohms MIX MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms

	60 – 14,000 Hz (±3 dB),
	using Sony TYPE II
	cassette
Wow and flutter	±0.15% W.Peak (IEC)
	0.1% W.RMS (NAB)
	±0.2% W.Peak (DIN)
		continued

47

Image 47

Sony MHC-D90AV Specifications, For the U.S. model AUDIO POWER SPECIFICATIONS, Amplifier section, CD player section

Contents

MHC-GR10AV MHC-RX100AV MHC-D90AV 3-859-540-1311997 by Sony Corporation Mini Hi-Fi Component SystemNOTICE FOR THE CUSTOMERS IN CANADA Note on CATV system installerNOTICE FOR THE CUSTOMERS IN THE U.S.A INFORMATIONGetting Started Table of ContentsSound Adjustment Other FeaturesInserting two size AA R6 batteries into the remote Step 1 Hooking up the main unitGetting Started Connect the FM/AM antennasPositioning the speakers Step 2 Setting upWhen carrying this system your speakers2 Connect the rear speakers Connecting the speakers1 Connect the front speakers To attach the center speaker pads 5 Connect the AC power cord to a wall outlet3 Connect the center speaker To attach the front speaker pads4 Press T.TONE ON/OFF when you are done adjusting Adjusting the speaker volumeStep 2 Setting up your speakers continued LEVEL +/- on the remote to adjust the volume1 2,4 3,5 Step 3 Setting the timeStep 4 Presetting radio stations 1 Press CLOCK/TIMER SETTo tune in a station with a weak signal Step 4 Presetting radio stations continued2 Press TUNING MODE repeatedly to select “AUTO” 3 Turn the jog dial 5 Turn the jog dial to select the preset number you wantConnecting an MD deck for analog recording Connecting optional AV componentsConnecting audio components Connecting an MD deck for digital recordingConnecting a super woofer except for MHC-D90AV Connecting a VCRConnecting optional AVcomponents continued AM antenna Connecting outdoor antennasFM antenna Normal play Playing a CD2 1 Æ‚ Basic OperationsDo this Basic OperationsTips 1 Press § EJECT and insert a blank tape into deck B Recording a CDCD Synchro Recording 2 Press § OPEN/CLOSE and place a CDPOWER Preset TuningListening to the radio VOLUME +3 Turn the jog dial or press = or + on the remote to tune in the desired preset stationTo listen to non-preset radio stations Listening to the radio continued1 Press TUNER/BAND to select the band you want 2 Press TUNING MODE so that “PRESET” appears in the display3 Turn the jog dial to tune in a preset station Recording from the radio3 Press · Playing a tape1 Press § EJECT and insert a recorded tape in deck A or B High-speed Dubbing Recording from a tape1 2 TipsTips Recording from a tape continued4 Press To stop dubbingThe CD Player Using the CD displayTo cancel Repeat Play Playing the CD tracks repeatedlyTo select a desired CD To cancel Shuffle PlayPlaying the CD tracks in random order Shuffle PlayProgram Play To cancel Program PlayProgramming the CD tracks „ 5 7Programing the CD tracks continued 2 Press NON-STOP so that the indicator on the button lights upTo cancel Non-Stop Play Playing CDs without interruption3 Press r Recording on a tape manuallyThe Tape Deck 1 Insert a blank tape into deck BProgram Edit Recording a CD by specifying track order5 6 10 12 Tape Select Edit To cancel Program EditSelecting tape length automatically To check the orderFlashing part of a CD To adjust the loop lengthTo adjust the flash length Looping part of a CDWave To adjust the wave lengthWaving the equalizer To listen through the headphones Adjusting the soundSound Adjustment For a powerful sound GROOVEPress DSP repeatedly to select a DSP mode To adjust the “presence” of the surround effectSelecting the surround menu Press PRO LOGIC while playing a program source To cancel the Dolby Pro Logic Surround soundEnjoying the Dolby Pro Logic Surround sound Selecting the audio emphasisTo change the equalizer display Selecting the Audio Emphasis To cancel the effectMusic menu options Adjusting the graphic equalizer Adjusting the audio emphasis2 Press P FILE MEMORY Making a personal audio emphasis filePersonal file To call up the personal file5 3 4 Other FeaturesWhen you are done Singing along KaraokeFalling asleep to music Sleep TimerWhen you choose auto To cancel the Sleep Timer function9 Turn off the power Wake-up Timer2 Adjust the volume 3 Press CLOCK/TIMER SET 6 Set the time to stop playback following the above procedure1 Tune in the preset radio station see “Listening to the radio” Timer-recording radio programsTo check the setting To cancel the timer operation3 Turn jog dial to select REC, then press ENTER/NEXT Timer-recording radio programs continued5 Set the time to stop recording following the above procedure 6 Insert a recordable tape 7 Turn off the powerCleaning the cabinet PrecautionsOn safety On placementCleaning the tape heads Troubleshootingprecautions continued When using a tape longer than 90 minutesThere is severe hum or noise The timer does not functionSpeakers CD PlayerThe tape does not record TroubleshootingcontinuedTape Deck TunerCD player section SpecificationsFor the U.S. model AUDIO POWER SPECIFICATIONS Amplifier sectionGeneral SpecificationscontinuedTuner section SpeakerH, I, J IndexD, E F, G52 Sony Corporation Printed in Indonesia