Sony MHC-GR10AV Playing CDs without interruption, Programing the CD tracks continued, Press ·

Programing the CD tracks (continued)

To	Press
Check the	CHECK on the remote
program	repeatedly. After the last
	track, “CHECK END”
	appears.
Clear a track from	CLEAR on the remote in
the end	stop mode.
Clear a specific	CHECK on the remote
track	repeatedly until the
	number of the track to be
	erased lights up, then press
	CLEAR.
Add a track to the	1 Select the disc tray with a
program	DISC 1~3 button.
	2 Select the track by
	turning the jog dial.
	3 Press ENTER/NEXT.
Clear the entire	once in stop mode or
program	twice while playing.

Tips

• The program you made remains in the CD player even after it has been played back. Press · to play the same program again.

•If “--.--” appears instead of the total playing time during programming, this means:

–you have programmed a track number which exceeds 20

–the total playing time has exceeded 100 minutes.

Playing CDs without interruption

–– Non-Stop Play

You can play CDs without pausing between tracks.

POWER	2		3 1
0	)		„
		⁄	Æ‚

1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD.

2 Press NON-STOP so that the indicator on the button lights up.

3 Press · .

To cancel Non-Stop Play

Press NON-STOP so that the indicator on the button goes out.

26