PRESETTING STATIONS
f,g
s | TUNER |
a |
|
c |
|
TUNER
a s
f,g c
The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in a preset station directly.
1Press TUNER repeatedly to select a band.
2Press for gto select a station.
3Press ato store the station.
A station is assigned a preset number, beginning from 1 in consecutive order for each band.
Preset number
PRESET NUMBER TUNING
1Press TUNER to select a band.
2Press c.
Each time the button is pressed, the next ascending preset number is selected.
Tuning by preset number
1Press TUNER to select a band.
2Press the numbered buttons on the remote control to select a preset number.
Example:
To select preset number 10, press +10 and 0. To select preset number 15, press +10 and 5.
To clear a preset station
Select the preset number of the station to be cleared. Then, press s, and press a within 4 seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.
NOTE
If there is a long period of power failure or disconnection of AC cord, the presetting of the station is canceled. In this case, preset again.
RADIO RECEPTION
En
Frequency
4Repeat steps 1 to 3.
The next station will not be stored if a total of 32 preset stations have already been stored.
