Panasonic SC-BTT583, SC-BTT490, SC-BTT790 operating instructions Messages, On the television

[BTT790] Wireless system (SH-FX71)

The wireless link indicator is flashing.

¾There is no link between the main unit and the wireless system. Turn the wireless system off and then back on. Alternatively, turn the wireless system off, disconnect the AC mains lead and then reconnect it.

The wireless link indicator does not light.

¾Check that the main unit is turned on, and the wireless system is turned on.

¾Ensure that the digital transmitter is fully inserted into the slot of the main unit. (> 15)

The wireless link indicator keeps flashing between red and green.

¾There is a power supply problem. Consult the dealer.

Network

I can’t connect to the network.

¾Confirm the network connection and settings. (> 16, 18, 38)

¾Check the operating instructions for each device and connect accordingly.

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾Higher transfer rate router such as 802.11n (2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾On the “Wireless Settings” screen (> 38), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network Setting” (> 18) again.

Messages

The following messages or service numbers may appear on the TV or unit’s display.

On the television

Cannot play.

¾You inserted an incompatible disc.

Cannot play on this unit.

¾You tried to play a non-compatible image.

¾Confirm “SD” on the unit’s display is not displayed and re-insert the card.

No disc inserted.

¾The disc may be upside down.

$This operation is not available.

¾Some operations are unsupported by the unit. For example;

jBD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.

IP address is not set.

¾The “IP Address” in “IP Address / DNS Settings” is “---. ---. ---. ---”. Set the “IP Address”, “Subnet Mask”, and “Gateway Address”. (Select the automatic address acquisition if necessary.)

The wireless access point currently has a low network security setting. It is recommended to change to a higher setting.

¾Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

No Video

¾Depending on the connected iPod/iPhone, video menu may not be available on the TV. Select “ALL” on the unit’s display and operate video playback from your iPod/iPhone menu. (> 26)

48 VQT3Z79