Panasonic SC-BTT583, SC-BTT490, SC-BTT790 operating instructions Sound

∫HDMI Output

Press [OK] to show the following settings:

¾HDMI Video Format

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

≥If “Automatic” is selected, the best suited output resolution to the connected television is automatically selected.

≥To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, the other equipment must also be 1080p compatible.

¾24p Output

When this unit is connected to a TV supporting 1080/ 24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

≥When playing DVD-Video, set to “On” and then set “24p” in “Picture Settings” (> 33) to “On”.

≥When BD-Video images other than 24p are played, images are output at 60p.

≥24p: A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.

¾HDMI Colour Mode

This setting is for selecting colour-space conversion of the image signal when the unit is connected using an HDMI cable.

¾Deep Colour Output

This setting is for selecting whether to use Deep Colour output when a television that supports Deep Colour is connected.

¾Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.

¾HDMI Standby Pass-Through

Even if this unit is in standby mode, a device connected with this unit can output videos and sound to the TV.

Moreover, you can switch the HDMI input terminal by pressing [EXT-IN] on the remote control.

≥Sound will not be output from this unit’s speakers.

∫NTSC Contents Output

(This works only for video output from the VIDEO OUT terminal.)

Select PAL60 or NTSC output when playing NTSC discs.

∫Still Mode

Select the type of picture shown when you pause playback.

Automatic	Automatically selects the type
	of picture shown.
Field	Select if jittering occurs when
	“Automatic” is selected.
Frame	Select if small text or fine
	patterns cannot be seen clearly
	when “Automatic” is selected.

∫Seamless Play

The chapter segments in playlists are played seamlessly.

≥Select “On”, when the picture freezes for a moment at the chapters segment in playlists.

Sound

∫Surround Effects (> 34)

∫Sound Effects (> 34)

∫Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥“Automatic” is effective only when playing Dolby TrueHD.

∫Digital Audio Output

Press [OK] to show the following settings:

¾Dolby D/Dolby D +/Dolby TrueHD

¾DTS/DTS-HD

¾MPEG Audio

Select the audio signal to output.

≥Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.

≥Not making the proper settings may result in noise.

36 VQT3Z79