Pioneer BDP-120 Before Starting Playback, Loading the Batteries in the Remonte Contorol

Disc Playback

Before Starting Playback

Loading the Batteries in the Remonte Contorol

1Open the rear cover.

Press lightly on this part and slide into the direction of the arrow.

2Insert the batteries (AA/R6 x 2).

Insert as indicated by the / marks into the battery compartment.

Insert the negative () side first.

3Close the rear cover.

Close securely (a click should be heard).

Approximate operating range of remote control

Remote control sensor

30º 30º

7 m

Remote control unit

Connecting the Power Cord

Plug the supplied AC cord into the AC IN terminal on the rear of the Player. Then plug into AC outlet.

Disc Playback

CAUTION

•Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one.

•When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks ( and ).

•Do not heat batteries, disassemble them, or throw them into flames or water.

•Batteries may have different voltages, even if they look similar. Do not use different kinds of batteries together.

•To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.

•WARNING

Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It can also reduce the life or performance of batteries.

To AC IN terminal

To AC outlet

NOTE

•Place the Player close to the AC outlet, and keep the power plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN-INSULATED PARTS OF ANY CABLES WHILE THE AC CORD IS CONNECTED.

•The STANDBY/ON indicator blinks while the Player is preparing for starting up. You cannot turn the Player on until the STANDBY/ON indicator stops blinking.

•If you are not going to use this Player for a long period of time, be sure to remove the AC cord from the AC outlet.

19