Pioneer BDP-120 operating instructions Connecting to the Component Jacks, Video Connections

Video Connections

Connecting to the Component Jacks

You can enjoy accurate color reproduction and high quality images through the component jacks.

STEPS

1Be sure to turn off this Player and the equipment before making any connections.

2Firmly connect a component video cable (commercially available) to the component jacks ( and ).

This Player

Red

Blue

Green

Red (CR) Blue (CB)

Green

COMPONENT

IN

Projector

(Red)

(Blue)

(Green)

To COMPONENT VIDEO output jacks

Component video cable (commercially available)

ToIN jacksCOMPONENT (Red)

(Blue)

(Green)

TV AV receiver

	CAUTION
•	You need to select the priority video output in
	“Settings” – “Audio Video Settings” – “Video Out
	Select”. (See page 37.)
•	When the priority video output is set to “HDMI” in
	“Video Out Select”, the video resolution which is output
	from the COMPONENT VIDEO output jacks is the one	Connection
	set in “HDMI Video Out”.

• When the output from the COMPONENT VIDEO output jacks is prioritized, set the priority video output to “Component”.

Blu-ray Disc	VCR	TV
Player

NOTE

•Connect the Blu-ray disc player to TV directly. If you playback the image via VCR, the image may deteriorate due to the copy guard function.

•When you record the program where copyright is protected, the copy guard function is activated automatically; the program can not be recorded correctly. Also, the playback image via VCR may deteriorate due to this function. However, this is not a malfunction. When you watch the program where copyright is protected, we recommend that the Blu-ray disc player be connected to TV directly.

Video equipment with component jacks

After connecting

• Connect audio equipment or the audio terminals of the TV. (Page 17)

15