Pelco IV SE manual Software/Language File Upload, C3412M 9/06

Software/Language File Upload

The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of revised operating software and language files. A Pelco field service tool is required to perform these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).

For instructions on how to upload revised operating software and language files refer to the Installation/Operation manual supplied with the field service tool.

NOTE: Only perform software uploads when necessary. Software uploads do not need to be performed if the dome system is operating properly.

During a software/language file upload, a progress bar will appear on the monitor to indicate data is being transferred to the Spectra dome system. The default setting for data transmission is 115.2 KB per second. Noisy and long-run connections will slow the transmission rate.

86 C3412M (9/06)