Final Sound user manual Adjusting the S100, Operational Guidelines

Page 7

6. ADJUSTING THE S100

Set the S100 in the desired location..

Connect the S100 to the stereo system (chapter 5)..

Set the volume control to a minimum, the crossover frequency to 40 Hz, and the phase to 0 degrees.. Turn on the stereo with music you are familiar with..

Turn up the subwoofer volume to a level that matches the main speakers..

Adjust the phase control to a maximum bass output..

Readjust the volume control..

Turn up the crossover frequency until the location of the bass becomes obvious, or the bass from the subwoofer overwhelms that from the main speakers..

Readjust the volume control..

If you have a dedicated stereo/surround setup guide/disc, refer to the directions included in it.. Note that you may need to try more than one location to reach optimum results..

7. OPERATIONAL GUIDELINES

As with all Final products, the S100 is designed to provide the highest level of performance.. However, the S100 still has limits that should be observed..

If the S100 begins to overload or heavily distort, turn down the bass or volume..

If the S100 overwhelms the output of the main speakers, turn down the volume..

If the main speakers sound strained, raise the S100 crossover frequency..

If the bass sounds loose or dislocated, adjust the phase or placement of the subwoofer until the problem disappears..

Placement of the subwoofer within the room is critical to the operation of the S100.. Recommended locations include the center of the front wall, either front corner, or the center of the side walls..

If the S100 malfunctions, turn the subwoofer off and on.. If the problem persists, contact your dealer for additional troubleshooting..

Contents Copyright 2006 Final Sound Solutions.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model S100 Table of Contents Important Safeguards World Wide Warranty Design SafetyWelcome Control Panel Features of the S100 SubwooferConnections High Level Inputs Connecting the S100 to Your SystemLow Level Inputs Operational Guidelines Adjusting the S100Cabinet Care SpecificationsLimited Warranty Registration How can I connect my subwoofer and avoid hum and noise? Subwoofer FAQDo I need a separate amplifier for my subwoofer? Can I clean my Final subwoofer?Do I really need a subwoofer? Should I unplug my subwoofer during lightning?Contents Copyright 2006 Final Sound Solutions

S100 specifications

The Final Sound S100 is a revolutionary product in the world of audio technology, particularly known for its innovative approach to sound reproduction. This electrostatic loudspeaker combines cutting-edge technology with aesthetic design, making it a popular choice among audiophiles and music enthusiasts. The S100 is engineered to provide an unparalleled listening experience by capturing the smallest nuances of sound.

One of the main features of the Final Sound S100 is its electrostatic design. Unlike traditional dynamic speakers that rely on moving coils and cones, electrostatic speakers use a thin diaphragm suspended between two stator plates. This design allows for incredibly precise sound reproduction, enabling the S100 to deliver clear highs and rich mid-range tones without distortion, even at high volume levels. The use of electrostatic technology means that the S100 can produce a quick transient response, enhancing the clarity and detail of the music being played.

In terms of build quality, the Final Sound S100 exudes elegance and sophistication. The speaker is housed in a sleek, minimalist cabinet that not only looks stylish but also minimizes resonance, allowing for clearer sound output. The cabinet's materials are carefully selected to enhance the overall acoustic performance, ensuring that the speakers blend seamlessly into any living space while also providing an impressive audio experience.

Another noteworthy characteristic of the S100 is its wide soundstage. The electrostatic design allows for a larger dispersion of sound, which gives listeners a more immersive experience. The speakers excel in creating a three-dimensional audio environment, making it feel as though the music is surrounding the listener rather than just emanating from a particular point. This feature is particularly appreciated when listening to complex musical pieces or live recordings, where spatial cues play a significant role.

The Final Sound S100 also includes advanced technologies such as high-quality crossovers and precision engineering components, which enhance its performance. These elements work together to ensure that the sound is balanced across different frequencies, allowing for a natural listening experience that doesn't favor any specific tone.

In conclusion, the Final Sound S100 represents a significant advancement in audio technology. With its electrostatic design, elegant aesthetics, wide soundstage, and advanced engineering, it stands out as a top choice for those seeking high-fidelity sound reproduction. Whether for casual listening or critical audio evaluation, the S100 offers a remarkable auditory experience that captivates and delights.
Top Page Image Contents