SECTION 4: CIRCUIT ADJUSTMENTS
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander
4-1. SETTING THE SERVICE ADJUSTMENT MODE
1.Standby mode (Power off).
2.Press Display Channel 5 Sound Volume + Power
SERVICE ADJUSTMENT MODE ON
Disp. Item Item (Item) order data
VP | 0 | 7 | SERVICE |
HSIZ |
| TV |
|
Mode
3.The CRT displays the item being adjusted.
4.Press 1 or 2 on the Remote Commander to select the item.
5.Press 3 or 6 on the Remote Commander to change the data.
6.Press MUTING then ENTER to write into memory.
SERVICE ADJUSTMENT MODE MEMORY
1.After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again.
2.Turn the power switch ON and set to Service Mode.
3.Call the adjusted items again to confi rm they were adjusted.
4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS
| MUTING |
|
| POWER |
| |
| (Enter into |
|
|
|
| |
|
|
| (Service Mode) | |||
memory |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| DISPLAY | |||
|
| (Service Mode) | ||||
|
| 3 |
|
| ||
|
|
| Item (Data up) |
Disp. Item Item (Item) order data
VP | 0 | 7 | SERVICE |
HSIZ |
| TV |
|
MUTING Green
ENTER Red
1 | 6 |
| |
Disp. (Item up) |
| ||
2 | Item (Data down) | ||
|
|
| |
(Device Item Up) | 5 |
| |
|
| ||
| (Device item down) | ||
4 |
|
|
|
| ENTER |
| |
Disp. (Item down) |
|
| |
(Enter into |
7. Press 8 then ENTER on the Remote Commander to initialize.
Disp. Item Item (Item) order data
VP 0 7 WRITE
HSIZ TV
Carry out step 7 when adjusting IDs 0 to 7 and when replacing and adjusting IC002.
| memory |
8 |
|
(Initialize) | 0 |
| (Remove from |
| memory) |
VOLUME (+) |
|
(Service Mode) |
|
8. DO NOT turn off set until SERVICE appears.
— 15 —