VentedEnclosureApplications, BoxBuildingNotes

VentedEnclosureApplications

Ported Solo-Barics? Absolutely...and with a vengeance! These enclosures incorporate massive slot- loaded (rectangular) ports with ultra low air velocity for ground pounding street bass that will make your “skin bounce on your bones!” These boxes are the enclosure of choice for outrageous street bass and high performance SPL contests. If space is not a problem and you want to get the most from your Solo-Baric, try one of these ported designs. You will not be disappointed.

The ported Compact design increases bass efficiency and fits in many space-limited applications. Although it is the smallest recommended ported enclosure, the output from 30 to 80 Hz will be considerably higher than that of any sealed box. The SPL / Deep Bass ported design has even more output in this crucial frequency band.

	The SPL / Deep Bass is the largest and most efficient enclosure design. The SPL / Deep Bass delivers
INSTALLATION	the sonic output needed to win SPL contests and it produces bass notes “all the way down to the
	cella”. This design turns heads and jump starts your heart.
	Model:	VentedCompact (MinimumEnclosureVolume)	VentedSPL/DeepBass (MaximumEnclosureVolume)

	S8L5	.66ft3 (18.7L) + port displacement	1.0 ft3 (28.3L) + port displacement
		1.5 x 9.5” (3.8x24cm) port, 19.25” (49cm) long	2 x 9.5” (5.1x24cm) port, 21.25” (54cm) long
		1.5 x 9.5” (3.8x24cm) port, 19.25” (49cm) long	2 x 9.5” (5.1x24cm) port, 21.25” (54cm) long
		Power Handling = 275W RMS	Power Handling = 275W RMS
	S10L5	1.25 ft3 (35.4L) + port displacement	2.25 ft3 (63.7L) + port displacement

If you prefer an ultra-smooth bass response, you should loosely fill your Solo-Baric enclosure with poly-fil stuffing. Ported designs will require covering the end of the port (located inside the box) with grill cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use of poly-fil will slightly decrease efficiency, but will deepen and extend the low frequency output.

For more advice on box building, refer to your Authorized Kicker Dealer, or click on the Support tab on the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view the corresponding information. Please E-mail support@kicker.com or call Technical Services

(405) 624-8583 for specific or unanswered questions.

Figure 5

	2.5 x 11.25” (6.4x29cm) port, 19.75” (50cm)	long	3 x 11.25” (7.6x29cm) port, 18” (46cm)	long
	Power Handling = 450W RMS		Power Handling = 450W RMS
S12L5	1.75 ft3 (49.6L) + port displacement		3.25 ft3 (92L) + port displacement
	2.5 x 13.25” (6.4x34cm) port, 22.5” (57cm)	long	3 x 13.25” (7.6x34cm) port, 14.5” (37cm)	long
	Power Handling = 600W RMS		Power Handling = 600W RMS
S15L5	3.0 ft3 (85L) + port displacement		6.0 ft3 (170L) + port displacement
	2.5 x 16.25” (6.4x41cm) port, 19.5” (50cm)	long	3.5 x 16.25” (8.9x41cm) port, 13.75” (35cm) long
	Power Handling = 750W RMS		Power Handling = 750W RMS

BoxBuildingNotes

Use 3/4” (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the “template” inside your Solo-Baric’s shipping carton to mark the mounting hole, then cut directly on the line. These designs need internal bracing. Add triangular bracing between each of the larger unsupported panels. See Figure 5.

D = 3 x 3 for S15L5, S12L5 D = 2 x 2 for S10L5, S8L5

Figure 6

INSTALLATION

All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the vented enclosures the displacement of the port must be calculated and added to the internal volume of the final design. Use the outer dimensions of the port and multiply “X x Y x Z”, convert to cubic feet, for example the S12L5 vented compact design’s external port dimensions are, using 3/4” (1.9cm) MDF:

[(13.25” + 1.5” total MDF wall thickness) x (2.5” + 1.5” total MDF wall thickness) x 22.5”] x (1 ft3 / 1728 in3 ) = .77 ft3, and add this number to the internal volume of the enclosure, S12L5’s 1.75 ft3 + .77 ft3 = 2.52 ft3. See Figure 6. Due to the necessary length of these ports, you may want to fold the port along the bottom and back walls. It will be impractical to use round ports for these designs.

Do not install a port opening against a solid surface, such as an internal brace, back-panel or trunk wall, seat or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest dimension of the rectangular port as the minimum amount of space between the port opening and any solid surface to insure unrestricted airflow.

4	SOLO-BARICL5SUBWOOFER

The displacement of the port must be calculated and added to the internal volume of the final design. The dimensions for X, Y, and Z may vary based on the thickness of the material used to make the port.

A Note on PowerHandlingCapacity

Solo-Baric subwoofers will handle massive amounts of power in any of the recommended enclosures,

minimum or maximum. The smaller enclosures are best for use in limited-space applications. The larger recommended enclosures will yield slightly more bass at the lowest frequencies.

The listed Power Handling capacities assume that both voice coils are in use.

Always connect both coils in a dual voice-coil speaker.

Note: The use of a subsonic filter will significantly increase the power handling.	5
The power handling specifications in these charts are calculated using a 25Hz, 24dB per octave subsonic filter.

S15L5, S12L5, S8L5, S10L5 specifications

Fortinet, a leader in cybersecurity solutions, has recently expanded its FortiGate series with the introduction of the S15L5, S8L5, S10L5, and S12L5 models. These models are geared towards providing robust security and performance for organizations looking to enhance their network security posture.

The FortiGate S15L5 targeted towards small to medium-sized enterprises, features an advanced multi-core architecture enabling high throughput and reduced latency. With integrated FortiOS, its security is amplified by IPS, antivirus, and web filtering capabilities, making it capable of analyzing all traffic, including encrypted traffic, to ensure maximum protection against evolving cyber threats. With a throughput of up to 1 Gbps, this model is designed for seamless integration into existing infrastructures.

Next in line is the S8L5 model. This variant is built with scalability in mind, making it ideal for growth-oriented businesses. It offers advanced traffic management and supports various VPN technologies, ensuring secure remote access for distributed teams. In addition to its high-level security features, the S8L5 is equipped with FortiCloud for centralized management, providing users with an intuitive dashboard for real-time monitoring and reporting.

Meanwhile, the S10L5 model is tailored made for organizations seeking a balance between performance and price. Its enhanced deep packet inspection technology allows for proactive threat detection and mitigation. The S10L5's ability to support up to 5 Gbps of IPS throughput ensures that organizations can handle peak loads effectively while maintaining security.

Finally, the S12L5 model delivers enterprise-grade capabilities for mid-sized organizations, boasting a remarkable level of extensibility for additional security services. With advanced capabilities in machine learning and AI-driven analytics, it offers predictive features that allow businesses to stay ahead of threats. Coupled with Fortinet’s security fabric, the S12L5 provides a holistic approach to network security, enhancing visibility and control across all connected devices.

In summary, the FortiGate S15L5, S8L5, S10L5, and S12L5 models represent the forefront of network security technology. They deliver on advanced features, scalability, and a future-ready design that addresses the dynamic needs of today's cyber landscape. Organizations leveraging these models can confidently protect their assets and respond to emerging threats with agility and precision.