01
Getting started
Setting Up a Bluetooth GPS Receiver
1Switch on your Bluetooth GPS receiver.
2Select Bluetooth in the Setup GPS Receiver screen then click Next.
CoPilot Live will begin searching for Bluetooth devices in your immediate vicinity. Once the search is complete, all nearby GPS devices will be displayed.
3Select your GPS receiver from the list. (If you are using the GPS receiver supplied with your CoPilot software it will appear in the list with a name similar to “BTGPS”.)
4Click Next. To complete the setup, click Finish.
You are now ready for your first trip with CoPilot!
Note: If you chose Manual to set up your Bluetooth receiver, you may be prompted to enter a pin code. Use “0183” or “0000” to enter.
10 | User Guide | 01 Getting started |
|
|
|
|
|
|
|
|
|
Tips: GPS Signal
•The fi rst time you use the GPS receiver it may take a moment to determine your position.
•GPS signal will be limited inside buildings, tunnels or parking lots. To work effectively the GPS receiver needs to have a clear line of sight to the sky.
•If you are using a USB receiver, be sure it is fi rmly plugged into your laptop and that your computer recognizes the device.