
Video Resolutions Mode (for both LCD and CRT)
| Resolution | 16 bits | 32 bits | |
| (High color) | (True color) | ||
| 
 | |||
| 
 | 
 | 
 | |
| 800x600 | Yes | Yes | |
| 
 | 
 | 
 | |
| 1024x768 | Yes | Yes | |
| 
 | 
 | 
 | |
| 1152x864 | Yes | Yes | |
| 
 | 
 | 
 | |
| 1280x1024 | Yes | Yes | |
| 
 | 
 | 
 | |
| 1400x1050 | Yes | Yes | |
| (SXGA+panel only) | 
 | 
 | |
| 
 | 
 | 
 | 
Video Memory
| Item | Specification | 
| 
 | 
 | 
| Chipset | Video chip  | 
| 
 | 
 | 
| Memory size | Video chip  | 
| 
 | 
 | 
| Interface | DDR | 
| 
 | 
 | 
Parallel Port
| Item | Specification | 
| 
 | 
 | 
| Parallel port controller | SMSC LPC47N227 | 
| 
 | 
 | 
| Number of parallel port | 1 | 
| 
 | 
 | 
| Location | Rear side | 
| 
 | 
 | 
| Connector type | |
| 
 | 
 | 
| Parallel port function control | Enable/Disable/Auto (BIOS or operating system chooses | 
| 
 | configuration) by BIOS Setup | 
| 
 | Note: Depending on your operating system, disabling an unused | 
| 
 | device may help free system resources for other devices. | 
| 
 | 
 | 
| Supports  | Yes (set by BIOS setup) | 
| (PS/2 compatible) | Note: When Mode is selected as EPP mode, “3BCh” will not be | 
| 
 | available. | 
| 
 | 
 | 
| Optional ECP DMA channel (in BIOS Setup) | DMA channel 3 | 
| 
 | 
 | 
| Optional parallel port I/O address (in BIOS | 378h, 278h, 3BCH | 
| Setup) | 
 | 
| 
 | 
 | 
| Optional parallel port IRQ (in BIOS Setup) | IRQ7, IRQ5 | 
| 
 | 
 | 
USB Port
| Item | Specification | 
| 
 | 
 | 
| Chipset | Via VT6202 | 
| 
 | 
 | 
| USB Compliancy Level | 2.0 | 
| 
 | 
 | 
| OHCI | USB 2.0 | 
| 
 | 
 | 
| Number of USB port | 4 | 
| 
 | 
 | 
| Location | Rear side | 
| 
 | 
 | 
| Serial port function control | Enable/Disable by BIOS Setup | 
| 
 | 
 | 
IEEE 1394 Port
| Item | Specification | 
| 
 | 
 | 
| Chipset | TI 43AB21 | 
| 
 | 
 | 
| InterfaceUSB Compliancy Level | IEEE 1394 1.0 | 
| 
 | 
 | 
| 26 | Chapter 1 |