Acer 650 manual Troubleshooting, Symptoms Verified Go To

Chapter 4

Troubleshooting

Use the following procedure as a guide for computer problems.

NOTE: The diagnostic tests are intended to test this model. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses.

1.Duplicate symptom and obtain the failing symptoms in as much detail as possible.

2.Distinguish symptom. Verify the symptoms by attempting to re-create the failure by running the diagnostic test or by repeating the same operation.

3.Disassemble and assemble the unit without any power sources.

4.If any problem occurs, you can perform visual inspection before you fellow this chapter’s instructions. You can check the following:

power cords are properly connected and secured; there are no obvious shorts or opens;

there are no obviously burned or heated components; all components appear normal.

5.Use the following table with the verified symptom to determine which page to go to.

Symptoms (Verified)	Go To
Power failure. (The power indicator does not go	“Power System Check” on page 63.
on or stay on.)
POST does not complete. No beep or error	“Power-On Self-Test (POST) Error Message” on
codes are indicated.	page 65
	“Undetermined Problems” on page 73
POST detects an error and displayed messages	“Error Message List” on page 66
on screen.
The diagnostic test detected an error and	“System Diagnostic Diskette” on page 43
displayed a FRU code.
Other symptoms (i.e. LCD display problems or	“Power-OnSelf-Test (POST) Error Message” on
others).	page 65
Symptoms cannot be re-created (intermittent	Use the customer-reported symptoms and go to
problems).	“Power-On Self-Test (POST) Error Message” on
	page 65
	“Intermittent Problems” on page 72
	“Undetermined Problems” on page 73

Chapter 4 61